Blenders

Double Cone Blender

Operation :

The Double Cone Blender is an efficient and versatile machine for mixing dry powder and granules homogeneously. All the contact parts made out of stainless steel of required grade by customer. Two third of the volume of the Cone Blender is filled to ensure proper mixing. It can be used for Pharmaceutical, Food, Chemical and Cosmetic products etc. 

Double Cone Blenders - Big Double Cone Blander

Salient Features :

  • The conical shape at both ends enables uniform mixing and easy discharge. 

  • All contact parts are made out of stainless 304 or 316 quality material, as required by customer. 

  • Maximum care has been taken to ensure safe operation of the unit. 

  • Manual rotating facility with hand wheel for inching. The same will be provided with ss cover & limit switch. ( In 200 Kgs. & above model ) 

  • Two nos. of safety road will be provided at back side. ( One LH side & one RH side ) 

  • Suitable size of butter fly valve at one end of the cone provided for material discharge & hole with openable cover provided at other end of the cone for material charging & cleaning. 

  • One shaft with 04 nos. of fixed buffels with mirror polished provided inside the cone. 

  • Cone will be mirror polished from the inside & outside & structure will be matt polished. 

  • All moving parts covered with SS304 covers. 

  • Safety guards made from SS304 pipes provided in front of the m/c with limit switch. 

  • Panel fabricated from SS304 material with facility of three phase indication, D.O.L. tarter, digital timer & Amp. Meter. 

  • As per customer requirement machine will be provided with left side drive or with right side drive. 

  • The conical shape at both ends enables uniform mixing and easy discharge. 

  • All contact parts are made out of SS304/316(as per customer requirement) quality material. 

  • Maximum care has been taken to ensure safe operation of the unit. 

  • Worm reduction gear use for speed reduction. 

  • Food grade rubber gasket will be used on both end of cone as well as in butterfly valve. 

  • Inside & outside of the cone will be polished to the mirror finished. 

  • General structure made out of SS304 and Polished to the matt / mirror finish ( as required by you ) in GMP Model. 

  • All safety guards & covers made out of SS304 in GMP Model. 
    Hand wheel will be provided for manual tilting of cone. 

  • Safety guards provided with limit switch to not start the machine when safety guards are not in proper position.

Top

Mass Mixer (For Powder/ Tablet)

Introduction

The Mass Mixer Machine is basically mixing a assembly wherein the mixing stirrer is in horizontal position in the container & have a single speed, simple rotation. The stirrer rotates around it self at a very slow speed inside the bowl and thereby achieving intimate mixing of dry or wet materials of Tablet Granulation, Powder, Chemicals, Food & Confectionaries Materials.

Because of a special design feature of machine & stirrer, the mass mixer can be mix the sticky materials & also uniformally and intimately mix the materials which are to be difficult to mix. 

Special Features :

  • Range of models to suit working volume 50,100 & 200 Kgs. At bulk density of 0.50 gms/cc.

  • All contact parts are made out of S.S.304 quality material.(SS316 provided on demand on extra cost)

  • Compact design requires comparatively smaller floor space.

  • Single stirrer with single speed for dry & wet mixing.

  • As stirrer's sealings comes in contact with product, there may be any black particle contamination problem, after sealing bush got wear & tear.

  • All non contact parts (general structure)made out of mild steel and claded with SS304 or crome plated or made out of SS304 in GMP Model. Contact parts are polished to the mirror finished and non contact parts are polished to the matt finished in GMP Model. All safety guards & covers made out of SS304 material in GMP model & made out of mild steel & painted in standard model.

  • General structure & all non contact parts are made out of Mild Steel & same will painted in Standard Model.

  • All moving parts are enclosed with safety guards.

  • Thrust bearings are provided to carry out rigid thrust load.

  • Easy for cleaning & operating.

  • Simply designed SS304 dust cover provided with one port for material charging & inspection.

  • Interlocking system with top dust cover, to avoid accident, during process.
    The container tilting system provided for easy unloading of material and easy cleaning.

  • Specially design all moving parts provided with provision of easy lubrication.

Optional Features :

  • SS316 product contact parts instead of SS304.

  • Variable speed drive or double speed of stirrer provided on extra cost , if required.

  • Flameproof model.

Application :

Ideal for mixing of Pharmaceutical powders, chemicals, food and confectioneries etc.

Top

V-Shape Blender

Operation

The "V" BLENDER is an efficient and versatile blending machine for mixing and lubrication process of dry powders homogeneously. Approximate two third of the volume of the Blender is filled to ensure proper mixing. The "V" Blender gives best result for powders due to suitable medium speed and "V" shape of container. It can be used for Pharmaceutical, Food, Chemical and Cosmetic products etc.

In "V" Blender the powders comes from all sides due to the "V" shape of the product container, hence requirement of RPM is medium. Suitable mainly for powder & granules type material. This type of material gets sufficient continuous movement. Due to the "V" shape of container, have only medium movement and will results in good quality of blending/lubrication of granules.

Special Features :

Big V-Blender

  • Suitable for dry mixing of products in powder form.

  • Easy for loading and unloading.

  • Easy for cleaning.

  • All contact parts are made out of SS304 / SS316 or SS316 L quality material, as per customer requirement.
    Simple design requires minimum maintenance.

  • General structure & safety guards made out of mild steel & painted in Standard Model and made out of SS304 & polished to the matt finish in GMP Model.

  • The "V" shape gives sufficient continuous movement to the granules, result in good quality.

  • Maximum care has been taken to ensure safe operation of the unit.

  • Manual rotating facility with hand wheel for inching.

Optional Features :

  • Contact parts made out of SS316 or SS316 L instead of SS304.
  • Flame proof drive motor along with flame proof starter.
  • Vacuum Loading facility for material charging.

( Will be provided on extra cost on your demand.)

Top

 

 

Home | About Us | Products | Clients | Catalog | Inquiry | Contact Us

www.jkindus.com  - J. K. Industries - India - All Rights Reserved